ALL MOBILE PHONE DEAD SOLUTION

ALL CHINA , SAM SUNG ,NOKIA ,MICROMAX, GFIVE ,LG, ETC.( SET DEAD) SOLUTION 100% WORKING  -CHEK CHANGE BATTERY ,CHEK BATTERY CONECTION  IF B/C IS DAMAGE THEN CHANGE B/C --CHEK B/C FOR LOOSE CONECTION RESOLD BATTERY CONECTER ./,
CHEK OFF LINE CHARGING ,.IF OF LINE CHARGING SHOWS THEN PROB. WITH  BATTERY, B/C ,ON/OFF SWITCH ,.CHEK THEM OR CHANGE ,CHEK 2.8 VOLTAGE ON ,ON/OFF SWITCH IF VOLTAGE SHOWS THEN PROBLEM WITH SOFTWARE UPDATE S/W...............
IF OFFLINE CHARGING NOT SHOWS THEN CHEK OK CONDITION OF PCB...
(1). SHORT CONDITION-SET M/M ON BUZZ MODE ,,SET M/M LEAD ON B/C'S POINT  RED LEAD ON POSITIVE  PIN AND BLACK ON NEGATIVE PIONT,,,,,THEN CHANGE THE DIRECTION OF M/M LEAD RED ON NEGATIVE AND BLACK ON POSITIVE ,,,,AFTER BOTH TESTING YOU LISTEN BEEP SOUND THEN PCB IS SHORT
SOLUTION------------CHEK PCB CAREFULLY ,,,IF MOISTER SEEN CLEAN PCB ,,,WITH CLEANER ,,,SET M/M ONE LEAD ON NAGATIVE PIN OF B/C ...WITH SECOND PIN YOU HAVE TO CHEK ALL N.P.C. WITCH NPC BEEP CHEK THEM IF FAULTY THEN CHANGE THEM FINALY PROB. CPU IC....
(2),.LEAKAGE CONDITION----CHEK PCB FROM B/C WITH M/M IF SHOWS BOTH SIDE SOME VALUE THAT IS LEAKAGE CONDITION,,,,
SOLUTION--SET M/M'S LEAD ON B/C'S POSITIVE POINT  AND CHEK ALL NPC --WITCH NPC BLOW BEEP SOUND CHEK OOR CHANGE THEM..........
(3)-------LAST  IS OPEN CONDITION IN THIS CONDITION TRACK IS BROKEN FROM B/C TO PCB OR ANY OTHER TRACK IS BROKEN ....CHEK CARE FULLY AND MAKE JUMPER,,,,
IF ON /OFF SWITCH NOT SHOWS ANY VOLTAGE  THEN MAKE JUMPER ...FINALY PROB. WITH CPU ,,,NETWORK IC ...POWER IC...H.R.C. THEM